Excavator telescopic arm, excavator barrel arm, telephone: 134 5068 4096, the same number on WeChat

Excavator telescopic arm, telescopic arm wood pulling machine: mainly used in municipal engineering, forestry wood pulling, deep hole excavation of bridge piers, subway and caisson applications;

The excavator’s telescopic boom has low cost and high operating efficiency. It can be designed and produced according to different working conditions. The telescopic boom of forestry excavator is 20 meters to 25 meters; the telescopic boom of municipal excavation is designed to be 20 to 32 meters. Subway and caisson excavation depth. It can be equipped with bucket and shell bucket configuration, high quality, high operation efficiency, and reduce misoperation; use excavator to achieve good operation efficiency; the length of the modified arm is between 12-32 meters (can be divided into two sections , three-section, four-section oil cylinder internal and external telescopic boom customization), the recommended size of the modified excavator is 12-38 tons of excavator modification;

Modified as follows:

1. External maintenance of the new telescopic boom cylinder

2. The use of small excavators has low modification cost and high efficiency, and the expansion ratio is 1 to 8 times the speed

3. The longest telescopic length of the excavator telescopic arm wood pulling machine is about 20 to 25 meters (with a good wood grabber, the excavator below 15 tons)

4. The telescopic arm of the excavator can be refitted with a configuration of 20 to 30 meters, and the excavator can be equipped with a wood grabber and a shell-type grab.

5. The national unified warranty for the use of the company's products is 12 months

6. The materials used for the above excavator telescopic arms are Q690 or T700, and HJ785 and 950 materials are available for special requirements.